Data Loggers

Each logger has multiple channels for recording data with a memory capacity of up to 60,000 data points. The state of the art technology allows for variable sample rates. A predefined start and stop time can be set and the sample rate can be adjusted within a specific temperature range.

The logger is made of AISI 316L stainless steel and the electronics are sealed in heat and moisture resistant material.
data_logger.jpeg
 

A Variety Of Loggers To Fit Your Application
The standard Pro logger is designed with interchangeable sensors and user replaceable batteries whereas the Mini and Micro are working with mounted sensors and user replaceable button cell batteries.

 
TSP_Pro_X_basic_L.jpg

TrackSense® Pro Logger
TrackSense® Pro loggers are designed to be accurate and durable in the harshest conditions. All components have been selected and tested to withstand the high temperatures and pressures associated with steam sterilization.
TrackSense® Pro X Logger
The TrackSense® Pro X logger is specially designed for -80°C applications such as lyophilization with low temperature and vacuum.

TrackSense® Pro XL Logger
The TrackSense® Pro XL is an extended logger with increased battery capacity. This logger is designed for the all applications in temperature range of -80 to +150?C.

TrackSense® Pro Basic Logger
Many applications do not require the high temperature range supplied by TrackSense® Pro or Pro X loggers. The Basic logger is designed to be a more specific solution for applications below 105°C. Suitable applications would be ambient warehouse validations, pasteurization, humidity and temperature stability studies. 

In accordance with ITS 08 ATEXQ5928 TrackSense® Pro, Pro X and Pro Basic loggers, inclusive Sky and equipped with pressure sensors and relative humidity sensors can not be exposed to more than 105°C when working in an environment where intrinsically safe equipment is required.

 
TSP_Pro_Lab2.jpg

TrackSense® Lab For Stability Studies 
This logger is designed with an active LED light to indicate when a pre-programmed alarm situation has been triggered. The LED blinks green when the logger is running within the pre-programmed temperature band. If the measured temperature reaches outside of this band, the LED blinks red indicating an alarm situation. 

The TrackSense Lab logger is ideal for monitoring temperature or RH in long-term stability applications. Call us to find further information about TrackSense Lab.

 

 

 
TSP_mini_micro.jpg

TrackSense® Pro Mini And Micro 
The Mini and Micro loggers are designed for applications where size is an issue. Each logger has a memory capacity of up to 14,500 data points. The low volume displacement makes these small loggers ideal for monitoring inside packaging. The TrackSense Pro Mini offers temperature monitoring only. 

FThe TrackSense Pro Micro can be configured with temperature or pressure sensors. Find further information about the Micro and Mini loggers by contacting Amscorp Scientific.

Custom Fittings
Packing glands are available for inserting sensors into any variety of packaging. The glands are threaded to accept sensors and will maintain the seal when pressurized.

 
Logger

Dimension DxH (mm)

Data Storage

Battery Life Hours

Temperature Range °C

TrackSense® Pro X (ATEX certified)**

25 x 44

60,000

info

-80 to +150*

TrackSense® Pro  (ATEX certified)***

25 x 44

60,000

info

-50 to +150*

TrackSense® Pro Basic

25 x 44

60,000

info

-30 to +105 

TrackSense® Pro Mini

20 x 16

14,500

100

0 to +140

TrackSense® Pro Micro(Temperature)

15 x 22

14,500

75

-20 to +140 

TrackSense® Pro Micro
(Pressure)

15 x 40

7,200*

50

-20 to +140 

TrackSense® Pro Compact (Temperature)

25 x 35

14,500

 

-30 to +140 

TrackSense® Pro Compact (Pressure)

25 x 55

7,200

 

-30 to +140 

TrackSense® Pro Lab

25 x 43.5

60,000

info

-30 to +100 

TrackSense® Pro Lab Mini

20 x 16

14,500

100

0 to +100

* Max 140 °C with Sky Module
** ATEX -60 to +105 °C
*** ATEX -30 to +105 °C
 

*Available data storage capacity is reduced from 14,500 to 7,200 due to internal temperature compensation of the TrackSense® Pro Micro logger pressure sensor.